SEAR-ious
Flavor
Louis Camille Maillard
(1878-1936) was a French physician and chemist. In 1912 he was researching
how amino acids combined to form proteins. Serendipitously, he uncovered
the basic chemistry behind something man had been doing since the discovery
of fire: searing meat with intense heat. (For the purposes of our
discussion, meat refers to any animal protein). In the culinary world, this
is now known as the Maillard reaction.
The Maillard reaction is a type of browning
reaction, so named for the dark brown color imparted to the food. Browning
reactions are extremely complex chemical transformations that result from
exposing food to high heat. It does NOT seal in the juices, as the common
culinary myth holds. What browning meat does is create intense flavor.
To produce a browning reaction, the heat must be
above 300 degrees. Since water cannot be heated above 212, boiled, poached
and simmered foods will never brown. Steam can go above 212 degrees if
under pressure. So unless you have a means of positioning your porterhouse
in a turbine engine, dry heat methods are the way to go. This means
roasting, broiling, grilling, sautéing and frying. (Even though oil is in
“liquid” form, frying is still a dry heat method. More on that in a future
frying article). The balancing act with dry heat methods is to cook the
center of your food to the proper doneness before the outside burns. The
larger the item, the more likely the exterior will burn before the heat has
penetrated the center sufficiently. We want to sear the surface of our
food, not incinerate it. (I’m using the term “sear” loosely. Technically,
searing is browning food in fat and thus, by the book, would only apply to
sautéing and frying). Here’s how to brown your food via each of the dry
heat cooking methods.
ROASTING: The method of choice for large items
such as a whole chicken or turkey, or a beef roast. The heat in an oven is
provided by convection, i.e., circulating air currents. Convection, not
being direct heat, is less harsh. Ergo, foods can roast for extended
periods of time and be cooked to perfection inside and out, assuming the
correct temperature is maintained. Generally, the larger the item, the
lower the roasting temperature. Given the correct temperature, all you need
to do is place the food in the oven and let nature take its course.
However, some chefs prefer to boost the heat temporarily at the beginning or
the end of the cooking to ensure a good sear. If this is your plan, you’re
better off spiking the heat near the end and you always should have a meat
thermometer to ensure you’re cooking the center properly.
BROILING: Broiling is not direct heat but
cooking via infrared radiation. However, the heat source is extremely hot
and in close proximity to the food. Thick items are not appropriate for
broiling. Again, you will obliterate the outside by the time the center is
cooked. Broiling is better suited to steaks as opposed to roasts, chicken
cut into pieces, chops, and even some fish. If your food is a little on the
thick side then move it further from the broiler.
GRILLING: Ah! One of the best thermal methods
for that ultimate sear. This is why grilling is so popular. Grilling is
intense, direct heat. But again, if your steak is very thick, or your
chicken breast is on the bone, you can transform the surface into an ashtray
while the center’s still a bacteria-fest. For large items, start them on a
hot part of the grill, sear them, and then move them to a cooler part of the
grill or on the rack above it to finish. Thin items aren’t an issue unless
they’re too thin. Then you get the opposite problem: the center is
overcooked by the time a proper sear is produced.
SAUTEING: Make sure the pan has fully heated
first. Add the cooking fat, allow it to heat up and then add the food. It
should sizzle when it hits the pan. Flip after the first side is seared.
The second side will not take as long. If the item is more than an inch
thick, you may need to finish it in the less intense heat of the oven to
prevent burning the exterior.
FRYING: Watch the temperature of the oil. It
varies with the food but 375 is almost always the max with most items cooked
in the 325-350 range. Here again, very large items are not appropriate.
In all of these methods: 1) the food should be
at room temperature at the onset of cooking, 2) heat the cooking vessel
and/or oil fully before introducing the food, 3) do not move the food until
the one side has seared, and 4) brushing the meat lightly with oil before
cooking will facilitate even browning.
|
